Your cart
Cart
All Collections

Creality 3D UW-03 Resin Washing Curing Machine

Creality 3D UW-03 Resin Washing Curing Machine Creality
$229.00
  • Powerful Vortex & 405nm UV Light
  • Large Wash & Cure Volume
  • Anti-roll Square Turntable
  • More Ways of Wash & Cure
  • Flexible wash method
  • Adjustable three-gear speed and 2-90 min optional
  • Dual-band UV light source

About Creality UW-03

  • Powerful Vortex & 405nm UV Light: Wash and cure, two in one. It brags a 31% stronger washing solvent vortex powered by a 500r/min magnetic propeller, easy to rinse off stubborn resin residues in every nook and cranny of miniatures; When it comes to curing, the enhanced array of 405nm UV LEDs gives off a more effective UV light; As the turntable rotates, the model surface gets solidified quickly and evenly; After washing and curing, your resin prints become neat, strong, and durable
  • Large Wash & Cure Volume: The wash volume is as large as 6.72L (210x160x200mm), able to accommodate prints of almost any size produced by consumer resin printers; Besides, with the light bar relocated, the machine is fitted in with a bigger turntable, and the cure volume is increased to 10.64L (215*165*300mm), which is 13.7% larger than UW-02. So, you can process larger and more models for a single curing session
  • Anti-roll Square Turntable: A square turntable is adopted for the first time; It is more space-efficient, given most resin prints occupy a square space rather than a round space; Moreover, the turntable features a perimeter curb, which is effective in keeping 3D models from rolling; And, it is stabilized by four ball casters at the bottom; The curing process is more steady than ever before
  • More Ways of Wash & Cure: Besides the regular ways of in-basket wash and on-turntable cure, it also enables hang-state wash and basket cure; For hang-state wash, you can wash resin prints attached to a build plate ranging from 8.9in to 10.3in, without removing the drippy resin prints beforehand; For basket cure, you can place the basket filled with oddly shaped models on the turntable for curing; No more fiddling with their orientations
  • Triple Precautions for Safety: The orange-tinted lid can block 99.9% of UV light from harming the eyes; The curing process will stop if the UV-blocking lid is not in place; So you can stay clear of potential hazards from the working UV light or turntable; In addition, the washing container is completely sealed; No more leakage, spilling, or volatilization of liquid during the washing process

 

 
  • guaranteeQuality checked
  • Free ShippingFree on all products
  • Special gift cardsSpecial gift cards
  • Free return Within 7 days
  • ConsultancyLifetime 24/7/356
← Back to Resin 3D Printer
  • Powerful Vortex & 405nm UV Light
  • Large Wash & Cure Volume
  • Anti-roll Square Turntable
  • More Ways of Wash & Cure
  • Flexible wash method
  • Adjustable three-gear speed and 2-90 min optional
  • Dual-band UV light source

About Creality UW-03

  • Powerful Vortex & 405nm UV Light: Wash and cure, two in one. It brags a 31% stronger washing solvent vortex powered by a 500r/min magnetic propeller, easy to rinse off stubborn resin residues in every nook and cranny of miniatures; When it comes to curing, the enhanced array of 405nm UV LEDs gives off a more effective UV light; As the turntable rotates, the model surface gets solidified quickly and evenly; After washing and curing, your resin prints become neat, strong, and durable
  • Large Wash & Cure Volume: The wash volume is as large as 6.72L (210x160x200mm), able to accommodate prints of almost any size produced by consumer resin printers; Besides, with the light bar relocated, the machine is fitted in with a bigger turntable, and the cure volume is increased to 10.64L (215*165*300mm), which is 13.7% larger than UW-02. So, you can process larger and more models for a single curing session
  • Anti-roll Square Turntable: A square turntable is adopted for the first time; It is more space-efficient, given most resin prints occupy a square space rather than a round space; Moreover, the turntable features a perimeter curb, which is effective in keeping 3D models from rolling; And, it is stabilized by four ball casters at the bottom; The curing process is more steady than ever before
  • More Ways of Wash & Cure: Besides the regular ways of in-basket wash and on-turntable cure, it also enables hang-state wash and basket cure; For hang-state wash, you can wash resin prints attached to a build plate ranging from 8.9in to 10.3in, without removing the drippy resin prints beforehand; For basket cure, you can place the basket filled with oddly shaped models on the turntable for curing; No more fiddling with their orientations
  • Triple Precautions for Safety: The orange-tinted lid can block 99.9% of UV light from harming the eyes; The curing process will stop if the UV-blocking lid is not in place; So you can stay clear of potential hazards from the working UV light or turntable; In addition, the washing container is completely sealed; No more leakage, spilling, or volatilization of liquid during the washing process

 

 

Warranty Information

Returns
Sometimes products need to be returned due to faults or other reasons. Please read the below information regarding our returns policy.
Your Rights under the Australian Consumer Law - Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If for any reason you are not satisfied with your purchase, return the goods to us within 14 days and we will offer you an exchange or refund. To be eligible for a return, goods must be unmarked and in original condition with original instructions and packaging.
Please note we will not refund the original delivery fee unless products are determined to be faulty under the Australian Consumer Law.

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Other Customers also buy:

  • Anycubic Photon M3 3D Printer Anycubic
    Anycubic Photon M3 3D Printer
    $345.00 Sold Out
    Anycubic Photon M3 3D Printer
    $229.00
    • 4K + Monochrome screen
    • Fast print speed
    • Larger printing volume
    • Laser-engraved build plate

    About Anycubic Photon M3

    • 4K + Monochrome screen: Bigger LCD screen, greater Freedom.
    • Fast print speed: 50mm/hour.
    • Larger printing volume: 180×163.9×102.4mm.
    • Laser-engraved build plate: Experience High rates of success.
      anycubic photon mono X printer
      Technical Specifications
      ● LCD screen: 7.6 inches monochrome screen
      ● Printing volume: 2.99 l / 101.19 oz
      ● Light transmittance: 4%
      ● Contrast ratio: 400:1
      ● Light source: parallel matrix light source
      ● Printing platform: Laser-engraved aluminum alloy platform
      ● Printing speed: ≤ 5 cm /1.97 inches per hour
      ● Control panel: 2.8-inch resistance touch screen
      ● Data input: USB-A 2.0 interface
      ● Power input: 55w rated power
      ● Print size: 18.0 x 16.3 x 10.2 cm / 7.1 x 6.4 x 4.0 inches
      ● Machine size: 42.5 x 26.9 x 25.6 cm / 16.7 x 10.6 x 10.1 inches. (HLW)
      ● Machine weight: 7 kg / 15.4 LBS

      Unleash your Imagination
      With a 7.6-inch high quality monochrome screen, the printing volume of Anycubic Photon M3 is up to 180×163.9×102.4mm.
      Sharpen your Mind
      Ultra-high resolution of 4,096 x 2,560 pixels. It is capable of producing parts with high dimensional accuracy and intricate detailing.
      Foundation is the Key
      The new build plate has a texturized checkerboard pattern that dramatically improves adhesion and print success rate.
      Ultra Fast Printing
      The fastest printing speed can reach 50mm/h, and it only takes 2.5 hours to print the 12cm high miniature, which is 30 minutes less than the 3 hours of the competitive products.
      Extremely sharp & clear edges
      The printer adopts an LCD screen with 400:1 contrast, 100% higher than its competitor. The high contrast leads to parts with better surface finish.
      Powerful Enlighting Matrix
      With the Anycubic LighTurbo matrix light source system, the matrix LED beads will provide strong light energy, making high-speed printing possible.
      Protect what Matters
      The anti-scratch protective film greatly extends the lifespan of the LCD screen.
      Fully Compatible Slicer
      Fully compatible with all Anycubic resin printers. It is easy to use and offers versatile and professional service without monthly fees.
      User-friendly interface
      More convenient and intuitive to operate and make the parameter adjustment.


  • Creality 3D Halot-One Resin 3D Printer Creality
    Creality 3D Halot-One Resin 3D Printer
    $279.00 Sold Out
    Creality 3D Halot-One Resin 3D Printer
    $229.00
    • NEW Light Source Structure:
    • High agility slicing, Creality New Slicing System
    • WIFI-APP intelligent control
    • OTA online upgrade
    • Smart Operation System -Linux
    • Great Operation Experience

    About Creality Halot-One

    • NEW Light Source Structure: 120W Power Super spotlight. The self-developed integral light source, Precision light control
    • High agility slicing, Creality New Slicing System: A Simplified user interface and Easy Modeling function, and supports the parameter customized.
    • WIFI-APP intelligent control: Supports Creality Cloud.
    • OTA online upgrade: New Firmware/new system. one-click upgrade. Get better experience in firmware upgrade
    • Smart Operation System -Linux: 64-bit 4-core CPU+GPU Mainboard supports the faster operation and greatly improves printing efficiency.
    • Great Operation Experience: Linux System For a better AI Experience, a 5-inch high definition colorful touch screen keep easy works.

     

  • Anycubic Photon Mono 4K 3D Printer Anycubic
    Anycubic Photon Mono 4K 3D Printer
    $299.00 Sold Out
    Anycubic Photon Mono 4K 3D Printer
    $229.00
    • Matrix parallel source
    • Large Build Volume
    • Fast Printing Speed
    • One piece FEP film

    About Anycubic Photon Mono 4K

    • Matrix parallel source
    • Large Build Volume
    • Fast Printing Speed
    • One piece FEP film
  • Anycubic Photon Mono X 3D Printer Anycubic
    Anycubic Photon Mono X 3D Printer
    $485.00 Sold Out
    Anycubic Photon Mono X 3D Printer
    $229.00

     

    • 8.9" 4K Monochrome LCD
    • Large Build Volume
    • Fast Printing Speed
    • Anycubic APP Remote Control
     

    About Anycubic Photon Mono X

    • 8.9" 4K Monochrome LCD
    • Large Build Volume
    • Fast Printing Speed
    • Anycubic APP Remote Control
  • Anycubic Wash & Cure Machine Plus Anycubic
    Anycubic Wash & Cure Machine Plus
    $279.00 Sold Out
    Anycubic Wash & Cure Machine Plus
    $229.00
    • Larger-size
    • Wash Mode
    • Cure Mode
    • L-shape Strip Light

    About Anycubic Wash & Cure Machine Plus

    • Larger-size
    • Wash Mode
    • Cure Mode
    • L-shape Strip Light
  • Anycubic Wash & Cure Machine 2.0 Anycubic
    Anycubic Wash & Cure Machine 2.0
    $169.00 Sold Out
    Anycubic Wash & Cure Machine 2.0
    $229.00
    • Wash Mode
    • Cure Mode
    • Touch Button
    • Safe Design

    About Anycubic Wash & Cure Machine 2.0

    • Wash Mode
    • Cure Mode
    • Touch Button
    • Safe Design

Login