Creality BL-Touch V1 Auto Bed Leveling Kit For Ender & CR 3D Printer
Regular price
$68.00
- guaranteeQuality checked
- Free ShippingFree on all products
- Special gift cardsSpecial gift cards
- Free return Within 7 days
- ConsultancyLifetime 24/7/356
- High Precision
- Intelligence
- Stable Performance
About Creality BL-Touch V1 Auto Bed Leveling Kit For Ender & CR 3D Printer
- Self-test: The push pin operates two times in a test when the power is on.
- Alarm: The LED light blinks if a problem was found on a self-test or during operation
- Wiring defect indicator: Blue and Red LED for indicating wiring defects.
CR Series: CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO
Ender Series: Ender-3, Ender-3 Pro, Ender-3X, Ender-5, Ender-5 Pro
BLTouch is a type of semiconductor hall sensor and is an electronic component for 3D Printers.
BLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.
- Features: The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.
Warranty Information
Returns
Sometimes products need to be returned due to faults or other reasons. Please read the below information regarding our returns policy.
Your Rights under the Australian Consumer Law - Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If for any reason you are not satisfied with your purchase, return the goods to us within 14 days and we will offer you an exchange or refund. To be eligible for a return, goods must be unmarked and in original condition with original instructions and packaging.
Please note we will not refund the original delivery fee unless products are determined to be faulty under the Australian Consumer Law.
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Translation missing: en.products.product.regular_price $68.00 Sold Out- Quick and easy installation
- Constant Temperature
- Dustproof and good noise reduction
- Stable Structure
About Creality Printer Enclosure Cover Small/Medium/Large Size
- Quick and easy installation： Folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room!
- Constant Temperature: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability.
- Dustproof and good noise reduction： The interior uses Pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure, and will not spread.
- Stable Structure: Equipped with a selection of Iron pipes, stable structure, and abundant space.
Creality Medium Led Enclosure
Creality Ender Small Enclosure
Creality UV Photocuring 3D Printer Protective Blackout Cover
Compatible Models：HALOT-ONE/LD-002R/LD-002H/UW-01Creality Advanced EnclosureCompatible Models：Ender-3/3Pro/3v2/Ender-5/Ender-7
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
-
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Translation missing: en.products.product.regular_price $24.50Translation missing: en.products.product.regular_price $68.00 Sold Out- Excellent adhesion
- Convenient to use
- Customized Designed
- High-performance
- Reliability
- Compatibility
About Creality 3D Ender 3/Ender 5 Ultrabase Heat Bed Glass Plate 235x235x4mm
- Excellent adhesion: Creality art carbon and silicone build surface provide the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand.
- Convenient to use: The new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Clean with water. Easy to remove your print by hand or with a scraper.
- Customized Designed: Designed with a small Creality logo at the bottom of Tempered Glass to both avoid logo printing marks and remind the model of printer platform.
- High-performance: As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.
- Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃.
- Compatibility: Compatible with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3X，Ender-3 V2, Ender 5, Ender-5 Pro.
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
-
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Translation missing: en.products.product.regular_price $145.99Translation missing: en.products.product.regular_price $68.00 Sold Out- Convenient Retrofit, Upgraded Performance
- Compact and Lightweight
- 3.5: 1 Gear Ratio
- All-metal Design
About Creality 3D Sprite Extruder Pro Kit For ENDER-3,3 PRO, 3 V2, 3 Max
-
Convenient Retrofit, Upgraded Performance
-
Compact and Lightweight
-
3.5: 1 Gear Ratio
- All-metal Design
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
-
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Translation missing: en.products.product.regular_price $58.00Translation missing: en.products.product.regular_price $68.00 Sold Out- Multi-point detection Smart compensation
- High precision Low power consumption
- Easy to install Strong compatibility
- Independent research and development stable function
About Creality CR Touch Auto Bed Leveling Kit for Ender-3/3pro/3V2/3MAX/5/10V3
-
Multi-point detection Smart compensation
-
High precision Low power consumption
-
Easy to install Strong compatibility
- Independent research and development stable function
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
-
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Translation missing: en.products.product.regular_price $68.00 Sold Out- Low noise motor
- High quality stepper motor
- Precise Rotation
About Creality 3D 42-34 42-40 Stepper Motor for Ender 3 Series/ CR 10 Series 3D Printer
- Low noise motor
-
High quality stepper motor
- Precise Rotation
42-34 Motor with Wheel L18mm:
X Axis: Ender-3 V2, CR-6 Max
42-34 Motor with Wheel L23mm:
Y Axis: Ender-3 V2, Ender-3Pro, Ender-3S
42-34 Motor:
X Axis: CR-10 S5, CR-10 V3
Z Axis: CR-10 Max, CR-10 S5, CR-10 V2, CR-10 V3, CR-10S Pro V2, CR20, CR-6 Max, CR-6 SE, CR-X, CR-X Pro, Ender-3, Ender-3 Max, Ender-3 V2, Ender-3Pro, Ender-3S, Ender-5, Ender-5 Plus, Ender-5 Pro, SV02
42-40 Motor:
X Axis: CR-10 Max, CR-10S Pro V2, CR-X, CR-X Pro, SV02, CR-200B
Y Axis: CR-10 Smart, CR-10 V2, CR-10 V3, CR-6 SE, Ender-3 Max, CR-200B
E Axis: CR-10 Max, CR-10 Smart, CR-10S Pro V2, CR-30, CR-6 Max, CR-6 SE, CR-X, CR-X Pro, Ender-3 Max, Ender-3 V2, CR-5060 Pro
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
-
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Translation missing: en.products.product.regular_price $27.40Translation missing: en.products.product.regular_price $68.00 Sold Out- No Edge Curling
- Excellent Flatness
- Super Convenient
- UNIVERSALITY
- Compatibility
About Creality 3D Ender 3/Ender 5 Soft Magnetic Sticker Platform 235x235mm
- No Edge Curling: 2020 new Creality 3D printer glass bed, its microporous coating on the upper surface can adsorb the model to the glass bed surface, no issues of print edges curling.
- Excellent Flatness: Improved 3D printer borosilicate glass plate provides a more flat and more smooth build surface than a magnetic mat or PEI sheet, ensuring high flatness for the bottom of the model.
- Super Convenient: Very easy to take off the model, no tools needed; This glass bed could be fixed with middle-sized clips and cleaned with alcohol
- UNIVERSALITY: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- Compatibility: Compatible with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3X，Ender-3 V2, Ender 5, Ender-5 Pro.
-
{"id":6888656175265,"title":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","handle":"creality-bl-touch-v1-auto-bed-leveling-kit-for-ender-cr-3d-printer","description":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2021-07-29T01:13:45+10:00","created_at":"2021-07-29T00:57:44+10:00","vendor":"Creality","type":"","tags":["Printer Accessories","Printer Accessory"],"price":6800,"price_min":6800,"price_max":6800,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40466722685089,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Creality-BLTOUCHV1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer","public_title":null,"options":["Default Title"],"price":6800,"weight":300,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"],"featured_image":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","options":["Title"],"media":[{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836918091937,"position":1,"preview_image":{"aspect_ratio":1.035,"height":924,"width":956,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288"},"aspect_ratio":1.035,"height":924,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_cffecf07-5eb5-48dd-9b4e-2f85a219166c.jpg?v=1627484288","width":956},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836922548385,"position":2,"preview_image":{"aspect_ratio":1.026,"height":838,"width":860,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315"},"aspect_ratio":1.026,"height":838,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_92063aee-cc01-4a09-a855-74ba163f6e55.jpg?v=1627484315","width":860},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836925726881,"position":3,"preview_image":{"aspect_ratio":1.051,"height":938,"width":986,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334"},"aspect_ratio":1.051,"height":938,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_a08aaf68-150c-4050-864c-93e51823b851.jpg?v=1627484334","width":986},{"alt":"Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026 CR 3D Printer Creality","id":22836928807073,"position":4,"preview_image":{"aspect_ratio":1.075,"height":867,"width":932,"src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349"},"aspect_ratio":1.075,"height":867,"media_type":"image","src":"\/\/cloverdigitech.com.au\/cdn\/shop\/products\/s-l1600_08ca6030-0815-48ea-bdfc-20121c778d7c.jpg?v=1627484349","width":932}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"spec\"\u003e\n\u003cli\u003eHigh Precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligence\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eStable Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"desc\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv id=\"ds_div\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003ca name=\"About%20Creality%20Ender%203%C2%A0\" id=\"About Creality Ender 3\" data-mce-fragment=\"1\"\u003eAbout Creality BL-Touch V1 Auto Bed Leveling Kit For Ender \u0026amp; CR 3D Printer\u003c\/a\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-test:\u003c\/strong\u003e The push pin operates two times in a test when the power is on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm:\u003c\/strong\u003e The LED light blinks if a problem was found on a self-test or during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring defect indicator:\u003c\/strong\u003e Blue and Red LED for indicating wiring defects. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCR Series: \u003ca\u003eCR-10, CR-10S, CR-10 S4, CR-10 S5, CR-20, CR-20 PRO\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnder Series: \u003ca\u003eEnder-3\u003c\/a\u003e, \u003c\/span\u003e\u003ca\u003eEnder-3 Pro\u003cspan\u003e,\u003c\/span\u003e \u003c\/a\u003e\u003ca\u003eEnder-3X\u003c\/a\u003e\u003cspan\u003e,\u003c\/span\u003e\u003ca\u003e \u003c\/a\u003e\u003ca\u003eEnder-5\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca\u003eEnder-5 Pro\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca title=\"BL Touch Sensor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBLTouch\u003c\/a\u003e is a type of semiconductor hall sensor and is an electronic component for \u003ca title=\"Creality 3d Printer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D Printers\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.\u003c\/p\u003e\n\u003cp\u003eBLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release \u0026amp; Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eFeatures:\u003c\/span\u003e The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of RC servo and microswitch. Thus, BLTouch can be applied on almost every board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-product-recommendations\" class=\"shopify-section\"\u003e\n\u003cdiv class=\"page-width\" data-product-id=\"4765327392853\" data-section-id=\"product-recommendations\" data-section-type=\"product-recommendations\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-section\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/000bf1d7-5bd8-4c27-98e7-df0dc33e138a\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/87554c9e-00c4-48ef-8aa5-838985b058b2\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0c901b08-fb3b-4abb-876b-cd7e1a97abcc\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/7e41f478-2d42-41f8-bd3b-aeeff1580382\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/49263495-6a5d-4b3d-8c02-ddeddd718362\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/f742f1c9-fe0f-4c30-a93f-438a8052ded3\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/0435756d-3ccd-4d1a-ac59-90f1830c6eb4\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/pic2-cdn.creality.com\/vip_mall\/312f69b3-3919-439a-aef8-ddd2f7fa43c3\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
